DEMIFLON® Expanded PTFE tape

Expanded PTFE tape with adhesive stripe for flanges Contains only materials conforming to FDA 21 - requirements for use in contact with food and chemical ingredients FDA21CFR 177.1550 (а) (1) и (b) Approved for use in oxygen environment-BAM It is an inorganic sealant tape for static applications made of 100% virgin PTFE. A unique process converts PTFE to a microporous fibrous structure, resulting in a sealant tape with an unsurpassed combination of mechanical and chemical properties DEMIFLON® Expanded PTFE tape with self-adhesive For easy fixing onto the sealing surface, there is normally a self-adhesive strip which is covered with a protective tape on one side.

Application:

EPTFE tape is especially suitable for sealing flange connections, pipe systems, hydraulic and pneumatic systems, etc. In addition,it’s also ideal for seals in glass,enamel and plastic flanges, vessels and special shaped sealing surface.
EPTFE tape saves money and time. Since there is no scrap or waste, it costs less than other gasket materials. By using only a few sizes, large inventories of sheet gasket and costly precut gaskets can be eliminated. Installation time is kept to a minimum since there are no templates, precutting or special fitting requirements.

Specification: Density	0.7~0.75g/cm3
Temperature	-240°C~+260°C
Maximum pressure	100bar
PH range	0~14
Media	Acids, alkalis, solvents, gases, etc

Width	Thicknes	Length/roll
3mm	1.5mm	30mt
5mm	2.0mm	25mt
7mm	2.5mm	25mt
10mm	3mm	25mt
12mm	4mm	10mt
14mm	5mm	10mt
20mm	7mm	5mt